Black Knight
Member
Hey guys,
I'm hoping that you can help me. I just purchased the OrangeRX T-Six transmitter and also the OrangeRX R615 6ch receiver. Now the problem that I'm having as you have already guessed is that I can't bind the transmitter to the receiver. I have double and triple checked everything and spent the last 2 hours reading different suggestions online.
So what actually happens is that I have the "bind" plug in the spot that says "Batt/Bind" on the receiver, then I plug my speed controller into the "Thro" port on the receiver and power it on. I then hold the "Trainer" switch on my transmitter and power it on. The receiver has a rapidly blinking light which I expected and the transmitter constantly has "Bind" across the display and I have held it there for 5 minutes with no change to the receiver status.
If anyone could shed some light onto this situation I would greatly appreciate it.
Cheers.
I'm hoping that you can help me. I just purchased the OrangeRX T-Six transmitter and also the OrangeRX R615 6ch receiver. Now the problem that I'm having as you have already guessed is that I can't bind the transmitter to the receiver. I have double and triple checked everything and spent the last 2 hours reading different suggestions online.
So what actually happens is that I have the "bind" plug in the spot that says "Batt/Bind" on the receiver, then I plug my speed controller into the "Thro" port on the receiver and power it on. I then hold the "Trainer" switch on my transmitter and power it on. The receiver has a rapidly blinking light which I expected and the transmitter constantly has "Bind" across the display and I have held it there for 5 minutes with no change to the receiver status.
If anyone could shed some light onto this situation I would greatly appreciate it.
Cheers.