binding tx to rx

[iceracer300]

so after i found out that 900Mhz and 1,3GHz are illegal in iceland i think and i fly using 2,4GHz so the only option is 5,8GHz and 200mw is not that long range i think so my question is can i bind this http://www.bevrc.com/immersionrc-600mw-58g-video-tx-p-266.html tx to this http://www.bevrc.com/bev-58ghz-pocket-size-high-sensitivity-receiver-p-24.html rx and if not what rx can i use whit that tx ?

thanks

 

[Danger Mouse]

Video RX/TX 5.8 GHz

Hi iceracer300

I have been looking at increasing the range of my FPV system. From what I understand the channels/frequencies must match on the RX and TX. The RX/TX combination that you are looking at unfortunately doesn't match (see below).

RC 305 RX
Channels/Frequencies: 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945MHz

Immersion RC 5.8GHz 600mw TX
Channels/Frequencies: 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz

*Note: RX has 8 channels/frequencies while the TX has only 7.

I have been using the following combination;

RC 305 RX
Channels/Frequencies: 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945MHz

5.8GHz 200mW FPV TX
Channels/Frequencies: 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945MHz

*Note: I have flown out with good video to 850 meters with Circular Polarized Antennas.

I have been looking at the following combination;

RC 305 RX
Channels/Frequencies: 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945MHz

5.8GHz 500mW 8 Channel TX
Channels/Frequencies: 5705, 5865, 5665, 5645, 5885, 5905, 5925, 5945 MHZ

*Note: Channels/ Frequencies match! The TX is available from HobbyKing.

I hope this helps.

Cheers

DM

PS If anyone has used this combination I would love to know your experience.