Bixler Stock Motor Screws Come Out!!!

[rshaan]

Hey guys, the two screws inside my stock motor came out! WTF!? The motor spins fine, is it safe to fly?

 

[Brian fred carr]

I would advise against a flight until you repair it...the screws must be there for
a reason

 

[Klonas]

Could you post a picture? If the screws came out can't you just screw them in?

 

[colorex]

If you are skilled, you can screw them back in through the ventilation hole. Don't fly like this, you could make another problem.

 

[FXX]

I noticed the same recently, I used a slotted screwdriver to overcome the angle and screwed them back through the ventilation hole, like colorex said, but now i will check them after every flight.

 

[jetpackninja]

Blue Locktite!
If they came out once they'll come out again

 

[FXX]

http://www.loctiteproducts.com/p/t_lkr_blue/overview/Loctite-Threadlocker-Blue-242.htm this one?

 

[colorex]

http://www.loctiteproducts.com/p/t_lkr_blue/overview/Loctite-Threadlocker-Blue-242.htm this one?

Yes! That one! The blue one allows for disassembly, the red one doesn't!

You want to put the threadlock on the tips of the screws, where they screw into the motor.

 

[FXX]

Thanks colorex, I guess I will put that on my shopping list.