Blunt Nose Versa CG

[pizatio]

Hi All,

I increased the width of the center section of the BNV by 4 inches, only changed it's width not length. Being now that the center section is 12 inches wide making total width 50 inches what should the new cg be?

Thx,

Pizatio

 

[ExperimentalRC]

http://rcwingcog.a0001.net

This shield give you a rough outline of where it needs to be. Once you have it around there then you should throw it like a free flight glider and move stuff around to see what works best. You won't really know for sure until you've experimented with it for a while.

 

[Winglet]

I did basically the same thin only even wider.. Turns out the CG really didn't move much from the standard blunt nose. Start with it just a little further forward and see how that goes.. I will at least be fly able there. Mine flys great..