Bronco Control horns

[tomlogan1]

Bought a speed build kit of the OV-10 Bronco and really liked the 3d printed control horns. Are they available for download?

Thanks.

 

[Houndpup Rc]

Bought a speed build kit of the OV-10 Bronco and really liked the 3d printed control horns. Are they available for download?

Thanks.

I could design some if you give me the dimensions and a couple close up pictures

 

[Houndpup Rc]

Actually are these what you are looking for?

Part - Standard Control Horn

Standard Control Horn STL Designed By: Dan Sponholz 3D printed control horn for use on most standard/swappable-sized FT models. New updated design for 2022. Print Settings: Material: PLA+ (eSun) Layer Height: 0.20mm Supports: None...

forum.flitetest.com

Part - Short Control Horn

Short Control Horn STL Designed By: Dan Sponholz 3D printed control horn. I designed this control horn specifically for my balsa to foam conversion of the Foam Wonder. This control horn will be practical for any foam board model with narrower...

forum.flitetest.com

Part - Mini Control Horn

Mini Control Horn STL Designed By: Dan Sponholz 3D printed control horn for use on most Mighty Mini-sized FT models. Print Settings: Material: PLA+ (eSun) Layer Height: 0.20mm Supports: None Rafts: None Infill: 20% Grid...

forum.flitetest.com

 

[tomlogan1]

Actually are these what you are looking for?

Part - Standard Control Horn

Standard Control Horn STL Designed By: Dan Sponholz 3D printed control horn for use on most standard/swappable-sized FT models. New updated design for 2022. Print Settings: Material: PLA+ (eSun) Layer Height: 0.20mm Supports: None...

forum.flitetest.com

Part - Short Control Horn

Short Control Horn STL Designed By: Dan Sponholz 3D printed control horn. I designed this control horn specifically for my balsa to foam conversion of the Foam Wonder. This control horn will be practical for any foam board model with narrower...

forum.flitetest.com

Part - Mini Control Horn

Mini Control Horn STL Designed By: Dan Sponholz 3D printed control horn for use on most Mighty Mini-sized FT models. Print Settings: Material: PLA+ (eSun) Layer Height: 0.20mm Supports: None Rafts: None Infill: 20% Grid...

forum.flitetest.com

Thanks, but these are not what I was looking to acquire. They are a two-piece arrangement that go through the wing (horn on the bottom of the wing pushing through retainer on the top) and very secure. I've printed all the ones to which you have linked but these that came from Flite Test are the best 3d printed ones I've used. Hey Sponz can you help?

 

[Houndpup Rc]

@SP0NZ

 

[FlyerInStyle]

Thanks, but these are not what I was looking to acquire. They are a two-piece arrangement that go through the wing (horn on the bottom of the wing pushing through retainer on the top) and very secure. I've printed all the ones to which you have linked but these that came from Flite Test are the best 3d printed ones I've used. Hey Sponz can you help?

I’ve found that if you go to thingiverse there are multiple modeksif control horns that do what you want.

 

[Mr Man]

Like these?

https://www.thingiverse.com/thing:3044432

https://www.thingiverse.com/thing:1999689

 

[LitterBug]

Thanks, but these are not what I was looking to acquire. They are a two-piece arrangement that go through the wing (horn on the bottom of the wing pushing through retainer on the top) and very secure. I've printed all the ones to which you have linked but these that came from Flite Test are the best 3d printed ones I've used. Hey Sponz can you help?

Are you sure they aren't injection molded? I'll have to recheck my kit, but pretty sure mine were molded not printed.

 

[tomlogan1]

Not sure, assumed 3d printed. They are great and I would love to be able to print them.

 

[tomlogan1]

I’ve found that if you go to thingiverse there are multiple modeksif control horns that do what you want.

Thanks for the note. I've been using Thingiverse for years. These are not from there and are the best I've used for foam board.

 

[FlyerInStyle]

Thanks for the note. I've been using Thingiverse for years. These are not from there and are the best I've used for foam board.

I know what you mean, but you can get close with some of the control horns from there.

 

[SP0NZ]

Not sure, assumed 3d printed. They are great and I would love to be able to print them.

The plastic FT horns are not printed. I believe they are injection molded.

 

[tomlogan1]

The plastic FT horns are not printed. I believe they are injection molded.

Thanks, Sponz.