Brushed quad build

BlockerAviation

Legendary member
All done, I'm about to plug it in. Let's hope I don't let the magic smoke out!
IMG_20210504_194724735.jpg
IMG_20210504_194735393.jpg
IMG_20210504_194745923.jpg
 

BlockerAviation

Legendary member
Oooh... I've been thinking about designing a build like this, I've gotta do some of the other stuff I've been thinking of first. Have you flown any acro?
By acro you mean in acro mode? If so than yeah, I can't stand flying in auto-level after learning helis. Also, this little brushed build flys like an under powered rex 80 in acro so it's still a ton of fun.
 

BayDesigns

Active member
By acro you mean in acro mode? If so than yeah, I can't stand flying in auto-level after learning helis. Also, this little brushed build flys like an under powered rex 80 in acro so it's still a ton of fun.
Good to know! What I really meant was have you done any freestyle (loops, rolls, etc) but regardless, it looks like I've got another thing to design!
 

BlockerAviation

Legendary member
Good to know! What I really meant was have you done any freestyle (loops, rolls, etc) but regardless, it looks like I've got another thing to design!
Yeah, I've been working on an inverted yaw spin recently. I've almost got it presentable but I don't have a big enough quad for a GoPro to record it.
 

BayDesigns

Active member
Thoughts? It's just an idea for now, I thought I might as well get a frame designed while I have some ideas. It's brushless instead of brushed, but it serves the same purpose. I'm not sure if it'll be a top- or bottom-mount battery, but that's not a big deal at this point.
Brushless Micro Freestyler.PNG
 

BlockerAviation

Legendary member
Thoughts? It's just an idea for now, I thought I might as well get a frame designed while I have some ideas. It's brushless instead of brushed, but it serves the same purpose. I'm not sure if it'll be a top- or bottom-mount battery, but that's not a big deal at this point. View attachment 199984
It looks good! Although I'm by no means an expert frame designer, I think I just got lucky on my first two designs.