Build first quad copter, Need help!

[HakonIngi]

Hi,

I am new to the RC community and i want to go into the quad copter. I am trying to figure out what parts i should buy. I want to build my quad so it can carry GoPro camera. I have found i think every thing i need but i am not sure if i am buying the right things or if i am missing something.

I would be really happy if someone that knows about quads more then me to help me.

Here is the parts that i am thinking about:

Frame x 1
http://www.hobbyking.com/hobbyking/...Quadcopter_V2_0_Carbon_Fiber_Frame_550mm.html

Battery x 2
http://www.hobbyking.com/hobbyking/store/__11944__Turnigy_nano_tech_2200mah_3S_35_70C_Lipo_Pack.html

ESC x 4
http://www.hobbyking.com/hobbyking/...ar_30_Amp_Multi_rotor_Brushless_ESC_2_4S.html

Power Distribution Board
http://www.hobbyking.com/hobbyking/...King_Quadcopter_Power_Distribution_Board.html

Props x 2
http://www.hobbyking.com/hobbyking/store/__25820__10x4_5_SF_Props_2pc_CW_2pc_CCW_Green_.html
http://www.hobbyking.com/hobbyking/store/__25824__10x4_5_SF_Props_Black_CW_2pc_CCW_2pc_.html

Motor x 4
http://www.hobbyking.com/hobbyking/...K3_2826_1130kv_Brushless_Outrunner_Motor.html

Motor ACC x 4
http://www.hobbyking.com/hobbyking/...ve_SK3_2826_Series_Replacement_Shaft_Set.html
http://www.hobbyking.com/hobbyking/...Aerodrive_SK3_28_XX_Spare_Accessory_Pack.html

Flight Control Board x 1
http://www.hobbyking.com/hobbyking/...ntrol_Board_With_6050MPU_And_Atmel_644PA.html

Accessories
http://www.hobbyking.com/hobbyking/store/__11736__Turnigy_Battery_Strap_330mm.html

Radios & Receivers
http://www.hobbyking.com/hobbyking/..._Module_8ch_Receiver_Mode_2_v2_Firmware_.html

Regards,
Hakon

 

[ikem]

why the extra shaft and accessories pack? get this, for the prop nut. It fits the SK3 adapters. http://www.hobbyking.com/hobbyking/store/__16719__NTM_Prop_Drive_28_Series_Accessory_Pack.html

You could go with 20A Escs, and the rest if fine. It will carry a gopro just fine.

 

[HakonIngi]

the extra shaft was if i broke something and the accessories pack i was looking for prop nuts but the 20A ESCs should i buy all none OPTO or 3 OPTO and one none OPTO ?

thanks for the help