Build Video for FT Tenet

[Steve Rosenbach]

Hi everyone! I haven't seen a build video yet for the new Flight Test Tenet. Am I missing something?

Also, I was sure that there was a Forum post on the Tenet, but I can't find it anymore.

I have a Tenet bundle on the way, and I'm looking forward to building and flying it.

Cheers!
SteveR

 

[Musdang]

Hi everyone! I haven't seen a build video yet for the new Flight Test Tenet. Am I missing something?

Also, I was sure that there was a Forum post on the Tenet, but I can't find it anymore.

I have a Tenet bundle on the way, and I'm looking forward to building and flying it.

Cheers!
SteveR

I think there still working / editing it.

 

[Matthewdupreez]

What the heck is the tenet?? Never heard of it....

 

[rcbigtirepilot]

What the heck is the tenet?? Never heard of it....

how have you not? it's in the store rn

 

[Matthewdupreez]

I never go on the store... Too expensive to get them shipped overseas...
And the plans are no longer available on the store

 

[rcbigtirepilot]

I never go on the store... Too expensive to get them shipped overseas...
And the plans are no longer available on the store

the FT tenet can't have plans, it's a hotwire cut kit

 

[Steve Rosenbach]

What the heck is the tenet?? Never heard of it....

Here you go:

 

[Quinnyperks]

I looked one over while talking to josh, It is hotwire, but it is quite complex how it all goes together

 

[Steve Rosenbach]

Well, I spoke a day to soon; the build videos are out! Thanks Josh and the whole FT gang!

 

[Musdang]

Well, I spoke a day to soon; the build videos are out! Thanks Josh and the whole FT gang!

Sweet! I’ll have to watch them later when I’m done with my current builds!

 

[Steve Rosenbach]

It looks as if the FT Tenet "Aerobatic wing" (37") is the same as the Tiny Trainer 4-channel wing?

 

[rcbigtirepilot]

It looks as if the FT Tenet "Aerobatic wing" (37") is the same as the Tiny Trainer 4-channel wing?

I would guess its pretty close

 

[Steve Rosenbach]

Ah, I just watched the videos, and the only thing missing is where to place and how to hook up the servos for the tail. I think it will be obvious for anyone who has built a few FT designs, and also, a video for this may be dropping some time today.

 

[checkerboardflyer]

The Tenet build videos are up. Here's a link: https://www.youtube.com/c/FliteTestTech/videos More tips for foam board RC model builders on my blog: https://foamboardflyers.com

 

[alan0043]

Ah, I just watched the videos, and the only thing missing is where to place and how to hook up the servos for the tail. I think it will be obvious for anyone who has built a few FT designs, and also, a video for this may be dropping some time today.

Hi Everyone,

I wonder how many videos there are for the Tenet ? Josh has not made a comment about the tray for some of the electronics that go into the gap in the middle of the plane. Just being curious. Josh also talks about putting in an Aura 5 in the plane. Wonder where it goes ?

 

[Steve Rosenbach]

The build videos that are now on YouTube are great as usual, but there are still missing pieces:
1. How to use the new FT motor mounts
2. How to mount the electronics and battery
3. How to build the tail - just build the horizontal and vertical pieces together and glue to the top of a removable tail holder?
4. Where and how to install the servos for rudder and elevator - how to route the control rods

My Tenet speed build kit arrived today. I've already done the fuselage, and used colored packing tape as in the "How to Build and Reinforce the Fuselage" video - no problem and it looks fine. I'll do the Sport Wing tomorrow. But then I need advice on the items above. It's Sunday night, and I thought the remaining info, whether in the form of a text post on this forum or full-fledged videos on YouTube, would be out by now.

 

[Steve Rosenbach]

I never go on the store... Too expensive to get them shipped overseas...
And the plans are no longer available on the store

Hi Mattthew - You can still find most FT plans, including for some discontinued models, at
https://forum.flitetest.com/index.php?threads/sp0nz-plans-index.17136/

Thanks to the indispensable SPONZ for these!

 

[Steve Rosenbach]

I looked one over while talking to josh, It is hotwire, but it is quite complex how it all goes together

Hi Quinny! Would you be able to shed some light on the following questions on building the Tenet?

1. How to use the new FT motor mounts
2. How to mount the electronics and battery
3. How to build the tail - just build the horizontal and vertical pieces together and glue to the top of a removable tail holder?
4. Where and how to install the servos for rudder and elevator - how to route the control rods

The several build video segments that are out for the Tenet are, as usual, first-class, but they omit covering the above.

I got my SBK a few days ago and have already built (reinforced, actually) the fuselage and built the Sport Wing, but I don't want to proceed further until I get those answers

Thanks for any help!

 

[Matthewdupreez]

Hi Mattthew - You can still find most FT plans, including for some discontinued models, at
https://forum.flitetest.com/index.php?threads/sp0nz-plans-index.17136/

Thanks to the indispensable SPONZ for these!

Thanks 👍... I get all my plans from sp0nz

 

[Quinnyperks]

Hi Quinny! Would you be able to shed some light on the following questions on building the Tenet?

1. How to use the new FT motor mounts
2. How to mount the electronics and battery
3. How to build the tail - just build the horizontal and vertical pieces together and glue to the top of a removable tail holder?
4. Where and how to install the servos for rudder and elevator - how to route the control rods

The several build video segments that are out for the Tenet are, as usual, first-class, but they omit covering the above.

I got my SBK a few days ago and have already built (reinforced, actually) the fuselage and built the Sport Wing, but I don't want to proceed further until I get those answers

Thanks for any help!

I do not know for the motor mounts and batteries, But the tail is a simple construction, and the servos are internal.