Bush Plane Build Challenge II

synjin

Elite member
Hondo76251, for the Durability video does it need to be a continuous video clip or just the landings? As soon as the weather breaks and we have something other than rain, I'll shoot the video. For the STOL clip I'm still trying to figure out an interesting landing/take-off spot. There's a park nearby with a long hill with trees on three sides and an uphill landing, but I'm not sure how dramatic that would be. I'll keep looking around.
 

Ketchup

4s mini mustang
Hondo76251, for the Durability video does it need to be a continuous video clip or just the landings? As soon as the weather breaks and we have something other than rain, I'll shoot the video. For the STOL clip I'm still trying to figure out an interesting landing/take-off spot. There's a park nearby with a long hill with trees on three sides and an uphill landing, but I'm not sure how dramatic that would be. I'll keep looking around.
I did a continuous video. It was a bit hard to upload, but I feel like it would be easier if everybody did a continuous video without having more than a couple breaks.
 

Hondo76251

Legendary member
Hondo76251, for the Durability video does it need to be a continuous video clip or just the landings? As soon as the weather breaks and we have something other than rain, I'll shoot the video. For the STOL clip I'm still trying to figure out an interesting landing/take-off spot. There's a park nearby with a long hill with trees on three sides and an uphill landing, but I'm not sure how dramatic that would be. I'll keep looking around.
In the interest of fairness, its probably best if we stick to continuous ones but I see no problem with fast forward to keep the time more reasonable and easy to upload ;)
 

Test Fly RC

Elite member
I got some parts for Scrappy!
WIN_20210623_08_37_38_Pro.jpg
 

Raccoonworks

Save your Trash!! Myles
So here's the completed Cessna 180. The maiden went well but it needed some landing gear work. So I ended up having to rebuild the landing gear and I even had to make my own wheel collets on my lathe. I'll post the video of the maiden soon.
 

Attachments

  • IMG_4364[1].JPG
    IMG_4364[1].JPG
    1.4 MB · Views: 0
  • IMG_4370[1].JPG
    IMG_4370[1].JPG
    1.5 MB · Views: 0
  • IMG_4371[1].JPG
    IMG_4371[1].JPG
    1.9 MB · Views: 0
  • IMG_4381[1].JPG
    IMG_4381[1].JPG
    2.1 MB · Views: 0
  • IMG_4382[1].JPG
    IMG_4382[1].JPG
    2.1 MB · Views: 0
  • IMG_4389[1].JPG
    IMG_4389[1].JPG
    1.8 MB · Views: 0
  • IMG_4391[1].JPG
    IMG_4391[1].JPG
    1.9 MB · Views: 0
  • IMG_4392[1].JPG
    IMG_4392[1].JPG
    1.6 MB · Views: 0
  • IMG_4390[1].JPG
    IMG_4390[1].JPG
    1.5 MB · Views: 0
  • IMG_4384[1].JPG
    IMG_4384[1].JPG
    1 MB · Views: 0
  • IMG_4387[2].JPG
    IMG_4387[2].JPG
    1.2 MB · Views: 0