Camera help

[Fred_dente]

Hello I have a little 2.4 GHz cam that plugs into my receiver and no matter how hard I try I can't put any thing on to it's sd card I have it in the Chanel six plug and I thought if I just flip the switch it would record help please.

 

[Bricks]

What voltage is your camera rated for, this just a camera or FPV camera.
the transmitter switch does not turn the power on per sea as it just opens the channel. If you want to control your camera by a switch you will need an RC switch that turns on and off by control of a switch on your transmitter.

 

[Fred_dente]

I don't no what voltage it is but I do know it's a non fpv cam and I do have a switch for it when I turn on the plane the light turns on on the cam

 

[Fred_dente]

I took it off a old drone it I don't know if it worked then but I've gotten one photo off it so I knew it worked and that's after I made an adapter for it

 

[Fred_dente]

Is there a way it would not turn on by a switch and just start recording when I turn it on and if so how would that work

 

[Bricks]

Do you have s picture of the camera may help to see exactly what you have.

 

[Fred_dente]

A will get on it

 

[Fred_dente]

Here you go

 

[Fred_dente]

The inside