Champ S+ prop adapter removal problem

[Justin_Mack]

Hey I was trying again to take off the prop adapter on my Champ but when we took out the screws the prop adapter stayed in, is their any other way to take it out or do we have to take off the hole top part of the champ and would that involve having to remove the servos wires from the wings?

Is there any diagram out there on the internal diagram of the Champ S+



Thanks,
Justin

 

[Jakehart184]

Hey what’s going on Justin. Is it the compression adapter where the nut squeezes it onto the male end of the motor?

 

[Justin_Mack]

Hey what’s going on Justin. Is it the compression adapter where the nut squeezes it onto the male end of the motor?

It’s fine we finally got it off by snapping and cutting it off

 

[French]

I open the top by cutting the small strips of tape along the two halves of the fuselage