kilroy07
Legendary member
I want to start this thread for all of us who are playing around with this material to share settings tips and tricks you've come across.
A link to the ColorFabb site.
https://colorfabb.com/lw-pla-natural
https://colorfabb.com/lw-pla-black
And a link to their printing suggestions or how to get some initial setting values for your printer.
https://learn.colorfabb.com/print-lw-pla/
Currently I am printing on my workhorse printer my Ender 3.
Simplify3D Setting I use (YMMV);
Extrusion Multiplier .45 (That's right only 45%)
Retraction (I've given up on that...)
Temp 240
Bed 60
Layer Height .2
I'll leave this as the starting point and post specific findings/thoughts as separate posts.
A link to the ColorFabb site.
https://colorfabb.com/lw-pla-natural
https://colorfabb.com/lw-pla-black
And a link to their printing suggestions or how to get some initial setting values for your printer.
https://learn.colorfabb.com/print-lw-pla/
Currently I am printing on my workhorse printer my Ender 3.
Simplify3D Setting I use (YMMV);
Extrusion Multiplier .45 (That's right only 45%)
Retraction (I've given up on that...)
Temp 240
Bed 60
Layer Height .2
I'll leave this as the starting point and post specific findings/thoughts as separate posts.