Completly original FT Style FPV Capable Plane, "Phat Slug"

[Spr0ck3t]

Hey folks, how you doin'?

I recently designed this plane in about a week and I'm planning on formating the plans and publishing all relevant project files here, as soon as I'm done with college exams. If you have anything specific that you'd want me to include in the plans, leave the request here. I'm guess the .STL format is sufficient for the parts that have to be 3D Printed. All parts are printable without any support and the foamboard I used is 6mm extruded polistyrene (best I could find where I live, unfortunately.

Flying starts at about 3:00 minutes.

 

[joelspangler]

very interested in your 3d printed landing gear - I'd like to check that out in further detail.

 

[Spr0ck3t]

As soon as I am finished with my exams, I will post all the files here. However, here is a little spoiler:

 

[Spr0ck3t]

If you folks haven't completely forgotten about this, here's a thread where I published ALL the source files, plans, and 28 pages of instructions on assembly:

https://forum.flitetest.com/index.p...mplete-plans-and-detailed-instructions.64236/