Helixable
New member
I have made my first scratch build for RC planes. When I connect the ESC to the battery and motor, the motor constantly beeps. Right now, nothing is connected to the receiver. I looked this up and it says I connected it wrong, or my minimum TX throttle is too low. First of all, this happens even before I connect the TX and connecting the TX only lets the servos work. Second of all, I have connected all the leads in the correct polarity. What do I do?
Heres some more info:
ESC: 30a
MOTOR: 2200kv
BATTERY: 2s 1300mAh
I'm 13 by the way
Heres some more info:
ESC: 30a
MOTOR: 2200kv
BATTERY: 2s 1300mAh
I'm 13 by the way
Attachments
Last edited: