Contra rotating props for FT Racer.

[iPeel]

Whilst on a website looking for something else, I spotted these:

http://www.aeorc.cn/products/cr23m-1550kv-with-prop-adapter-blade.html#.Us-jiWRdVKU

They're also on eBay here:

http://www.ebay.com/itm/AEO-Model-1100KV-Contra-rotating-Brushless-Motor-for-RC-Airplane-OM449-/400605987286?pt=Radio_Control_Parts_Accessories&hash=item5d45fa41d6

I'm not sure if anyone else has spotted them but they look perfect for making a Ripslinger. They're actually two separate motors so would need 2 esc's and a Y lead.



Neil.

 

[MarkD]

here's a better deal:http://www.hobbyking.com/hobbyking/store/__10591__CR23M_Contra_Rotating_BL_System1550kv.html

Or if you want a little larger: http://www.hobbyking.com/hobbyking/...ating_Brushless_Motors.html?strSearch=counter rotating motorhttp://www.hobbyking.com/hobbyking/store/__23771__CR50S_50_62_580KV_Contra_Rotating_Brushless_Motors.html?strSearch=counter rotating motor

 

[pgerts]

I TOTALLY AGREE - Ripslinger should always have a double motor lika that.
250W should be OK.

 

[epicstrikard]

This on a FT 3D!! Would probably tear it to shreds but I still think it's be a heckuva lot of fun to try!!!!

 

[xuzme720]

Contra's would kill the torque rolls...make hovering easier, probably maybe. Might have to give that a try!

 

[pgerts]

Where can i buy a 3-blade 7*6 carbon SKYSLACER to my Dusty?
Need to replace those foam wings to sleek balsa for the final race.

 

[iPeel]

Contra's would kill the torque rolls...

If you used a mix on two throttle channels going to the two separate ESC's you could control them independently on a switch when you wanted to.