jd7792
Senior Member
Hi guy's,
Still waiting on hardware and electronics to finish this project, but in the mean time I thought I would seek some advise about my wings profile. As you can see in the two photos below the shape is basicall the same as most wings. It has a wing span of 30" a wing depth of 9.5" and a centre length from nose to motor mount of 11".
I notice that a lot of people use pink foam to make their KF Air Foil, but I have been limited with the foam that I have available. So I decided to use two extra pieces of depron to built the density up. While I was playing with the first part of the Air Foil I found a 3rd piece of foam that was thinner than the original foil. I cleaned it up and came up with the idea that is in the attached photo's. As it is I have a two step AF Air Foil, but I am not sure how that will work so now I need some advise before I glue everything together.
So my question is, "Will a two step AF Air Foil work?" If so can anyone tell me how it will effect the overall wing?
Please let me know what you think...
Still waiting on hardware and electronics to finish this project, but in the mean time I thought I would seek some advise about my wings profile. As you can see in the two photos below the shape is basicall the same as most wings. It has a wing span of 30" a wing depth of 9.5" and a centre length from nose to motor mount of 11".
I notice that a lot of people use pink foam to make their KF Air Foil, but I have been limited with the foam that I have available. So I decided to use two extra pieces of depron to built the density up. While I was playing with the first part of the Air Foil I found a 3rd piece of foam that was thinner than the original foil. I cleaned it up and came up with the idea that is in the attached photo's. As it is I have a two step AF Air Foil, but I am not sure how that will work so now I need some advise before I glue everything together.
So my question is, "Will a two step AF Air Foil work?" If so can anyone tell me how it will effect the overall wing?
Please let me know what you think...