Differential thrust on DX8e? HELP!

[Bricks]

I do not own a DX8E here is a video on setting up a DX8 not sure if it will help you but should be close.

.

 

[Duck]

@chrisvdv identified my issue as the travel on Aux1 being set incorrectly. Thanks @chrisvdv !

 

[chrisvdv]

@Duck
You are more than welcome.

 

[chrisvdv]

@Duck
You are more than welcome.

I am glad we could trace the problem and sort it. I know how frustrating it is to watch all the instructional videos on a topic but when you do it it wont work as in the video's

Enjoy your flying.

 

[Mutley]

Hey all,

Had a dog of a time finding this setup, I used it, and now it works!

Here is what you do.

For two motors using differential thrust to control Yaw, grab your Spektrum Dx6e transmitter

on the Spektrum Receiver AR6110:

Left Motor ESC plug: Throttle
Right Motor ESC plug: Gear Caution: remove red wire on one servo plug first if both ESC's have BECs!

Go to mixing menu:

Mx1: THR > GER Rate 0% 100%
Mx2: RUD>THR Rate 0% -70%
Mx3: RUD>GER Rate 70% 0%

Make sure you setup a switch for each mix in case you want to turn it off.

Happy Flying

 

[Joe Carpino]

Hey all,

Had a dog of a time finding this setup, I used it, and now it works!

Here is what you do.

For two motors using differential thrust to control Yaw, grab your Spektrum Dx6e transmitter

on the Spektrum Receiver AR6110:

Left Motor ESC plug: Throttle
Right Motor ESC plug: Gear Caution: remove red wire on one servo plug first if both ESC's have BECs!

Go to mixing menu:

Mx1: THR > GER Rate 0% 100%
Mx2: RUD>THR Rate 0% -70%
Mx3: RUD>GER Rate 70% 0%

Make sure you setup a switch for each mix in case you want to turn it off.

Happy Flying

Thanks!!