Differential thrust

[Robyle3]

Hello! I'm looking for tips on setting up differential thrust on my 7ch lemon rx and Dx8e.
First off, am I even going to have enough ports? I don't have any landing gear, and on the Lemon ch7 is not available as it is dedicated to gyro gains and is assigned to the dial.
So that leaves me with:
Thro/Rudd/AILE/ELEV/GEAR/AUX 1.

I do have flaps, so either aux or gear is being used for that. I am kind-of familiar with mixing, I just don't know how to get started with diff thrust. Any help much appreciated!

 

[chrisvdv]

This is also a good reference to differential thrust setup. It is the same for the DX8e.
https://www.flitetest.com/articles/differencial-thrust-setup-on-a-spektrum-dx9

Which model Lemon Rx have you got? There is more than one model. Also make sure about the channels and I would refer you to the installation and setup documentation. Channel 8 is the one thats not available and you cannot use channel 5 for retracts.
Read the following threads:
RCgroups discussion
http://www.rcgroups.com/forums/showthread.php?t=2164243
User Manual re-direct link (Thanks to John [JJ604 RCgroups] in helping us with this user manual.)
http://www.lemon-rx.com/index.php?route=information/information&information_id=7
This for the standard Stabilizer
https://www.rcgroups.com/forums/showthread.php?2800238-The-NEW-official-Lemon-Stabilizer-Plus-thread
This for the "PLUS"

These are my setup on a Dx8e and a Lemon Rx Stabilizer PLUS 7ch.

 

[Robyle3]

I forgot there was a plus version! That is the one I have, thx.
I'll post back if I have any questions, thanks for the quick reply

 

[chrisvdv]

My setup is for a "PLUS".