Digital servo?

[nhk750]

I am getting ready to purchase some servos for my Hog Bipe build and was settling on the Hitec HS-645MG servos, then I ran across the digital servo. The Hitec HS-5625MG Digital servo. It costs about $10 more than the analog, but I have never used a digital servo so I am not sure if it will be better, more hassle or worth the extra $20 for two servos? The specs are very similar, but the digital is much faster and supposed to have a finer travel and better control. Does anyone have any experience with this? My power system is more than adequate for the servos and I am running an external BEC with 6s battery.

 

[ElectriSean]

You said it, faster and more precise. The only hassle really is they draw more current than analog, but your power system should be solid. Only you can say if it's worth it, but this is going into a pretty nice build, I would go for it.