Dollar Tree Foambooard Scratchbuild Techniques

ExAir

Junior Member
I have produced a series of 20 how-to videos detailing some of the construction techniques I've found useful in working with "Dollar Tree Foamboard" (actually Readi-Board by RL Adams Plastics). I would like to share them here.

The idea of the video series is to show ways you can create and refine the main components of a foamboard scratchbuilt airframe of your own design. These parts include:

1. a true, cambered airfoil wing, easy to make and join sections as needed
2. a one-piece tubular fuselage, also joinable for additional length
3. a simple unitary vertical and horizontal stabilizer assembly

I have adapted this technique to building at least 10 different designs, some of which I have featured in videos as well. Please feel free to copy those or make up your own designs. I've personally used these methods to build planes from 500g EDF's to 2600g cargo lifters to 60" wingspan FPV canard platforms.

I hope this information can be useful to other builders and I would be very eager to see your designs posted on this thread and on YouTube.

Peace,
Ed


WING

http://www.youtube.com/watch?v=qJZoqGHAIDE

http://www.youtube.com/watch?v=UNqFnzmm0vI

http://www.youtube.com/watch?v=RgBSbnZh_KM

http://www.youtube.com/watch?v=-z_mBiPw6z0

http://www.youtube.com/watch?v=idnT5eP5Snw

http://www.youtube.com/watch?v=C7PO6I_Ypcg

http://www.youtube.com/watch?v=xfXEGyklLUU

http://www.youtube.com/watch?v=MhotIq8cJZA

http://www.youtube.com/watch?v=o_RA_SqgYSE

http://www.youtube.com/watch?v=96dAMyt-hhg

FUSELAGE TUBE

http://www.youtube.com/watch?v=Xafg-o83L94

http://www.youtube.com/watch?v=42uuGA8i9yg

STABILIZERS (Horizontal and Vertical, with Control Surfaces)

http://www.youtube.com/watch?v=B0SbC7LpzcA

http://www.youtube.com/watch?v=e1_pjhQWj98

http://www.youtube.com/watch?v=YYhMjc6tNQ4

http://www.youtube.com/watch?v=xx6VE-SFRbM

http://www.youtube.com/watch?v=RpIdJX5Jagw

MOTOR MOUNTS

http://www.youtube.com/watch?v=JNWwgOYBfjs

HATCHES

http://www.youtube.com/watch?v=4zaX5wLmI2U

EDGES & FINS

http://www.youtube.com/watch?v=7Vh4KHilsK0

EXAMPLE: PEACE DRONE

http://www.youtube.com/watch?v=cq0HSwuosW0

http://www.youtube.com/watch?v=HZS2Husi1HQ

Example: FUGLYJET

http://www.youtube.com/watch?v=H0fG4wBq_80

Example: SKYVAN

http://www.youtube.com/watch?v=CKC6rnTX16E
 

RC Dad

Member
Ed,

Great videos. I had seen a few of these awhile back. My two sons and I are getting into this and your videos are very helpful. Thanks for posting them here. I have subscribed!
 

voipmonkey

Senior Member
Ed
love your videos. going to see if I can get a bunch of scouts to build your new trainer :S
wish me look keep the videos coming.
 

RC Dad

Member
After crashing a Fun Jet and RC Powers X-31 seconds after take off, I decided a need a plane better suited to the newbie that I am. I am now building the Axon. Think it is going to be a great plane for me. Have the wing done for the Noob Tube as well.

I am building the Axon with a 60" wing span - do you think I would need to put struts on the wing? The 55" seemed ok without them. I am using a 1/4 square dowel for the spar.

Thanks for the videos - they are perfect for the newb builders out there.... My son's and I have learned a lot and expect to have a whole fleet of the tube style planes this year.
 

ExAir

Junior Member
RC Dad - That's great to hear! I think the Axon will be a nice, slow trainer for you, and one you won't mind as much bashing up, especially having a spare nose. I don't think you'll need struts. Just be generous with rubber bands and choose a good dowel from the lot. Bonus for the square dowel! I hope you can share some pix and video of your creations. - Ed
 

Tritium

Amateur Extra Class K5TWM
ExAir, It would be great if you could put the series on Disk. YouTube is a long term waiting game for many I would bet. I know it is for me.

Thurmond
 

voipmonkey

Senior Member
Hi Ed
i have some foam board from my local hobby store and the paper on it is quick think. I am guessing not as thin as the dollar tree foam board you use. I am having a few issue getting the paper off, you any idea of a good way to ease this?
Mark
 
Scratch Build

Hey ExAir

Love your videos. I so want to build some of your planes. I just don't know where to source "Dollar Tree Foamboard" (actually Readi-Board by RL Adams Plastics) down here in Australia.

Keep them coming!

Jase
 

colorex

Rotor Riot!
Mentor
Hi Ed
i have some foam board from my local hobby store and the paper on it is quick think. I am guessing not as thin as the dollar tree foam board you use. I am having a few issue getting the paper off, you any idea of a good way to ease this?
Mark

Have you tried wetting it a bit?
 

ExAir

Junior Member
Hi Ed
i have some foam board from my local hobby store and the paper on it is quick think. I am guessing not as thin as the dollar tree foam board you use. I am having a few issue getting the paper off, you any idea of a good way to ease this?
Mark

You can try to wet it with water. It's a shame because the "peelability" is somewhat important to many steps in the process.
 

voipmonkey

Senior Member
You can try to wet it with water. It's a shame because the "peelability" is somewhat important to many steps in the process.

I know Ed but its the only stuff I can find in the UK with the paper on the outer edge. Would love to find an alternative as your builds are very interesting. will try the water and see if this helps. I have just finished a nut ball frame using this board and it wasn't that bad.
Mark
 

Bolvon72

Senior Member
Mentor
Ed, while patiently waiting for the Cruiser to come out, I tried my hand at some of your techniques. I never used packing tape as a covering so I grabbed a sheet of foam and some purple tape and made a tube. What now?.. Of course, a noob tube. With a little of you and a little of Josh I built a nice swappable noob and had a great maiden tonight. Thanks Ed, your videos made it stupid simple to follow along and I have another great looking sturdy plane to run about the field. I feel like I doubled my scratch building toolbox in a just a few days. Keep your eyes in the sky!

2013-04-02 19.11.42.jpg