Douglas A-1D Skyraider build

[leaded50]

American single-seat attack aircraft in service from 1946 to the early 1980s, which also served during both the Korean War and Vietnam War.
The Skyraider had an unusually long career, remaining in front-line service well into the Jet Age , when most piston-engine attack or fighter aircraft were replaced by jet aircrafts.

 

[leaded50]

cant say why, but its something about this plane who attracts me

At first i planned make a bit "smaller" RC model, but after checking "my storage" on parts, i found mostly some bigger motors to use. At moment then its planned to be approx. 930mm long, who will give a wingspan of approx 1450mm at scale.

ive started with the internals...:

 

[leaded50]

started "get skinned" and adjustments/fixin of parts to the frontal area around the cowl, and the air intakes at top/bottom.

 

[leaded50]

Done "a bit" more... Firewall is glued in, with enough vents for air going trough here and there. Easier to get esc wiring to motor, chill the esc, and airstream on battery eg.
Cockpit is pretty done with framing and 3D printed pilot in approx correct sizing. (thats also the hatch for changing battery, check reciver + tailservos eg. Upper part of the rear with the tailfin is done, only missing lower skin there. Reason is needs make all connection mount of pushrods to rudder/elevator, servo /pushrod mount of side airbrakes, rear wheel with sttering(connection to rudder) , tailhook, eg.
If you see behind cockpit down on sides its part that have another color at moment, (its posterboard ) Thats the airbrake ! it angle out by a servo to lower speed when landing. A pretty big "shield", orginally also at bottom, its easy to understand the prefernces of the plane as a divebomber who was its planned service. Its pretty "crazy" to know, it could take a load bigger than the B-17 bomber. ......

 

[leaded50]

its a bit challenging to see/use "the brain" to fix problems/solutions in building.... specially when your sick and pretty heavy medicined against pain..... After some tryes, i got the steerable rear wheel in place, and found a idea to get the fuselage side airbrakes in function. Also pushrods/controlhorn to tail is pretty much hidden.. (approx 10mm on rudder is missing..) ...

 

[leaded50]

fuselage quite ready, missing dummy engine, and cockpit "glassing" , in the livery of "The Swordsman" task force air ops at Vietnam war.
:

 

[danskis]

Wow!

 

[leaded50]

Wow!

Thanks @danskis , preciate your feedback 🥴

 

[leaded50]

Prop came in mail, and then..... ITS DONE !!

 

[FlyerInStyle]

Prop came in mail, and then..... ITS DONE !!


View attachment 243274

that is such a beautiful representation of a originally not so beautiful aircraft.

 

[leaded50]

that is such a beautiful representation of a originally not so beautiful aircraft.

quite true! but it got a unique service history, who makes it special in its way.

 

[Coachbear52]

cant say why, but its something about this plane who attracts me

At first i planned make a bit "smaller" RC model, but after checking "my storage" on parts, i found mostly some bigger motors to use. At moment then its planned to be approx. 930mm long, who will give a wingspan of approx 1450mm at scale.

ive started with the internals...:

View attachment 243071

Where did you get your plans.

 

[FlyerInStyle]

Where did you get your plans.

I believe he doesn't get plans from anywhere, instead he uses blueprints of the plane to make his own plans/ parts. Quite impressive

 

[leaded50]

Where did you get your plans.

Correct by FlyerInStyle, i dont build by plans, but from pictures, design sketches, or 3D views if its found. Totally from scratch, and therefore also some adjusting of parts directly on/under the build .