Located in Charleston, SC
Will ship to lower 48. Prices below. If you need shipping out side of the continental US, or international just ask.
Getting away from multirotors for the time being. Parting out my Electrohub that I put together in April, then again in June.
Electrohub frame kit, with battery/camera tray. Power wires for ESC and battery soldered. This is in the "spider quad" configuration, but can be changed to anything you want. Im throwing in several spare wood booms with dihedral mounts. Both rear booms need to be rebuilt. Just the inner section needs to be changed. If you boil the booms the dihedral mounts will come free. They are cracked where the bolts go thru the frame.
$45 shipped lower 48 what you see is what you get. **Flite test landing gear included but i forgot to snap a pic**
How i had the gimbal mounted. Front of the frame is cut out for clearance.
APM 2.6 w/ GPS. I just ordered this in June from GETFPV.com. Comes with everything that you should get brand new plus a buzzer. I used it for low battery and arm/disarm warning. Also includes a fold able GPS mount to get the compass up and away from power sources and magnetic fields.
Be sure to do every step, including the advanced compass calibration, dont skip anything on the APM set up!
2 red 3 LED strips are included that I had on the bottom of the rear arms.
$200 shipped lower 48
Altitude Hobbies Power Pack
Suppo 2212/15 motors with Ipeaka 22A ESCs. 9x4.7 Gemfan Props(balanced)
$80 shipped lower 48
'EBAY" Brushless gimbal. Tuneable with SimpleBCG. I belive its version 2.2
I retuned it for a SJ4000 cam. They are lighter than a GoPro. Very easy to work with. Its also inverted and flipped on the mount. Works great, tilt and roll are also adjustable via extra radio channels. I had the tilt set up on the dial knob on my DX7s, it was perfect.
$45 shipped lower 48
***SJ CAM NOT INCLUDED***
Will ship to lower 48. Prices below. If you need shipping out side of the continental US, or international just ask.
Getting away from multirotors for the time being. Parting out my Electrohub that I put together in April, then again in June.
Electrohub frame kit, with battery/camera tray. Power wires for ESC and battery soldered. This is in the "spider quad" configuration, but can be changed to anything you want. Im throwing in several spare wood booms with dihedral mounts. Both rear booms need to be rebuilt. Just the inner section needs to be changed. If you boil the booms the dihedral mounts will come free. They are cracked where the bolts go thru the frame.
$45 shipped lower 48 what you see is what you get. **Flite test landing gear included but i forgot to snap a pic**
How i had the gimbal mounted. Front of the frame is cut out for clearance.
APM 2.6 w/ GPS. I just ordered this in June from GETFPV.com. Comes with everything that you should get brand new plus a buzzer. I used it for low battery and arm/disarm warning. Also includes a fold able GPS mount to get the compass up and away from power sources and magnetic fields.
Be sure to do every step, including the advanced compass calibration, dont skip anything on the APM set up!
2 red 3 LED strips are included that I had on the bottom of the rear arms.
$200 shipped lower 48
Altitude Hobbies Power Pack
Suppo 2212/15 motors with Ipeaka 22A ESCs. 9x4.7 Gemfan Props(balanced)
$80 shipped lower 48
'EBAY" Brushless gimbal. Tuneable with SimpleBCG. I belive its version 2.2
I retuned it for a SJ4000 cam. They are lighter than a GoPro. Very easy to work with. Its also inverted and flipped on the mount. Works great, tilt and roll are also adjustable via extra radio channels. I had the tilt set up on the dial knob on my DX7s, it was perfect.
$45 shipped lower 48
***SJ CAM NOT INCLUDED***
Last edited:
