Headbison
Junior Member
A newbie to the quad building have 5 RTF's 350QX down to the micros. Problem is I ordered this electronics package because it was suppose to be plug and play, and later found out it's that easy... After watching Crash's video Flip 1.5 for dummies and trying to get my computer(iMac) and the FCB to talk, and still not sure if it is working fully, since it crashes (MultiWiiConf) every time I close the comm port. Let me backup I went ahead and hooked everything up, without running the MultiWiiConf program test everything and it seemed to be working, took it out and all it would do was try and flip over (all motors were running the proper direction, but as it started to lift off it would tilt towards the front left and the flip over. Thinking i needed to run the program and sync everything, I went back to try and get the computer side of things going. Hate to say it but weeks later finally got things to talk and work like the video. So with renewed hope I took it out to try and fly again, to only have the same thing happen again......holding the quad and throttling up the quad seems to want to buck, and after about 10-15 sec of doing that I noticed that the front left motor was warm and all the rest were cool......could all my problems be a bad motor out of the box? Help please, live in a rural area with the closest hobby shop being 70 miles away, and can't find any other fliers around either.
Thanks Headbison
Thanks Headbison