Hello all,
I am currently having an issue with the electrohub spider configuration that hopefully someone can help me with. A little background information I have set up the naze 32 board on the quadcopter I have calibrated the accelerometer, calibrated all the esc's, checked the correct way the motors are spinning. The issue I was having was on lift off my quadcopter is drifting a lot in one or two directions. I have tried to trim the aircraft using my transmitter and it does not seem to be working. If anyone would have any suggestions that would be wonderful.
I am currently having an issue with the electrohub spider configuration that hopefully someone can help me with. A little background information I have set up the naze 32 board on the quadcopter I have calibrated the accelerometer, calibrated all the esc's, checked the correct way the motors are spinning. The issue I was having was on lift off my quadcopter is drifting a lot in one or two directions. I have tried to trim the aircraft using my transmitter and it does not seem to be working. If anyone would have any suggestions that would be wonderful.