bgfireguy92
Senior Member
Hello Ladies and Gents! So built my first quadcopter
Now this is the exact setup the guys here at FT recommend. All electronics are from RTF Quads with MW Pimp my Flip 1.5 running 2.3 software.The "pimp" is I added on the mag and baro to the FC. Receiver is Spektrum AR610 and running a Spektrum DX6 (NOT THE DX6i, the new 2014 edition DX6)
Have a few questions Im hoping to get answered by one of you fine people more knowledgeable than I.
#1 When I engage the baro on it for poops and giggles it really starts to "yo-yo" about +/- 4ft from where I engage it at. So wondering if this a software issue, tuning issue, or throttle application issue.
#2 I had no problem assigning the gear channel on the AR610 to aux 1 on the FC and the switch I wanted on my DX6 (went with B). Problem is I wired the aux 1 on AR610 to the aux 2 on FC and assigned it another 3way switch (in this case H) but nothing. I checked the switch levels in wingui so I know the assigned switch for B is working but I am getting nothing for the aux 2 channel on the FC.
Any ideas comments concerns here? I wanna thank everyone in advanced who may or may not comment on this so if I dont thank you personally I apologize.
Im having a blast learning to fly this and have been showing it off to the guys at the fire dept who are impressed with it. (and those guys are damn hard to impress! lol)
Have a great day everyone.