pepeuserafa
Junior Member
Hello there,
This is my first quad build
, and i'm having problems with the Emax simon k 12A esc. When i connect the esc to the battery, it does nothing but emit a starting sound, then stop and nothing else happens, even the sounds related to the configuration by transmitter, which happens when the throttle stick stays in the top position.
I have tested the motors with others ESC's and they worked fine.
I need help because a bought 6 of these ESC's and all of them had the same behavior.
My equipment:
TX: HITEC OPTIC 6 SPORT;
RX: HITEC OPTIMA 6;
Motors: DYS BE1806:2300 KV;
Flight Controller: Naze 32.
ps: I've tested the esc's directly to the RX, and did not connected them to the flight controller yet.
This is my first quad build
, and i'm having problems with the Emax simon k 12A esc. When i connect the esc to the battery, it does nothing but emit a starting sound, then stop and nothing else happens, even the sounds related to the configuration by transmitter, which happens when the throttle stick stays in the top position.I have tested the motors with others ESC's and they worked fine.
I need help because a bought 6 of these ESC's and all of them had the same behavior.
My equipment:
TX: HITEC OPTIC 6 SPORT;
RX: HITEC OPTIMA 6;
Motors: DYS BE1806:2300 KV;
Flight Controller: Naze 32.
ps: I've tested the esc's directly to the RX, and did not connected them to the flight controller yet.
