Andrew
G'day Mate
If you have a 3D printed a model feel free to show it off and give a link to where you got the G Code or STL files from.
Nucking Futs - Speed 400 Pylon Racer - RC plane
https://www.thingiverse.com/thing:3358880
This one took about 2 1/2 days to print (printed with "3D Fillies" PLA+), then another 2 days to sand it smooth, then 4 coats of primer and a good sanding between primer coats, then 4 coats of automotive acrylic yellow paint with light rub back between coats, then applied the black carbon fiber textured vinyl stickers then the final 4 coats of automotive acrylic clear coat.
I'm hoping this model will go over 200kph
Nucking Futs - Speed 400 Pylon Racer - RC plane
https://www.thingiverse.com/thing:3358880
This one took about 2 1/2 days to print (printed with "3D Fillies" PLA+), then another 2 days to sand it smooth, then 4 coats of primer and a good sanding between primer coats, then 4 coats of automotive acrylic yellow paint with light rub back between coats, then applied the black carbon fiber textured vinyl stickers then the final 4 coats of automotive acrylic clear coat.
I'm hoping this model will go over 200kph
Last edited: