FC Receiver Wiring Help Needed

King kwad

New member
Hello everyone,

I am building my first quad and i am having trouble connecting my receiver. So I have a SP Racing F3 V1 Flight controller and I don't know where i should wire my FrySky XSR Receiver? Any help would be greatly appreciated.

Thanks,

-King Kwad
 

Montiey

Master Tinkerer
They are JST SH connectors, according to the manual. Next thing is the pin count. I.e, "JST SH 7 pin", etc. Should be easy to find on amazon, just look and make sure that it's the right shape- there are a few types of JST connector out there in the wild. ;)
 

ElectriSean

Eternal Student
Mentor
There are UART1 & 3 headers as well, though I know on my clone SPF3 the UART3 header doesn't work. These are shown in the manual I linked. Definitely worth trying.
 

King kwad

New member
6F730FFB-6283-40FE-8BA9-7F28897498B2.jpeg Will using this connector and splicing the receiver wires to it work?
 

ElectriSean

Eternal Student
Mentor
That should work, as long as the connector seats properly. I'd also use a dab of hot glue on the connector just to be safe.