• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

Finally!

colorex

Rotor Riot!
Mentor
#1
Finally purchased my first FPV gear.

Purchased from SierraRC.com, Pete (store owner) gave me the best customer support I have ever had. He will test my gear to make sure it is working fully before he ships it!

Here's a list. I'm getting a SAW upgraded Rx:


[TD="width: 350, align: left"]Description[/TD]
[TD="width: 100, align: right"]Unit price[/TD]
[TD="width: 50, align: right"]Qty[/TD]
[TD="width: 80, align: right"]Amount[/TD]

[TD="align: left"]400mW (1.3GHz) 1258, 1280 MHz Transmitter US [250]
Item# VTX-1015[/TD]
[TD="align: right"]$44.99 USD[/TD]
[TD="align: right"]1[/TD]
[TD="align: right"]$44.99 USD[/TD]

[TD="align: left"]30cm SMA male to male RF Pigtail Coaxial Cable RG316 [269]
Item# RFCONN-1020[/TD]
[TD="align: right"]$8.99 USD[/TD]
[TD="align: right"]1[/TD]
[TD="align: right"]$8.99 USD[/TD]

[TD="align: left"]1.3/2.4 GHz Notch filter (IBCrazy) [280]
Item# FILTER-1012[/TD]
[TD="align: right"]$19.99 USD[/TD]
[TD="align: right"]1[/TD]
[TD="align: right"]$19.99 USD[/TD]

[TD="align: left"]SONY SUPER HAD II CCD Camera 2.8mm Lens (PZ0420 Clone) [356]
Item# CAM-1020[/TD]
[TD="align: right"]$39.99 USD[/TD]
[TD="align: right"]1[/TD]
[TD="align: right"]$39.99 USD[/TD]

[TD="align: left"]3S Video Link Board by IBCrazy (Video Aerial Systems) [361]
Item# LINK-0010[/TD]
[TD="align: right"]$23.95 USD[/TD]
[TD="align: right"]1[/TD]
[TD="align: right"]$23.95 USD[/TD]

[TD="align: left"]Custom 900MHz-1.3Ghz Receiver [243]
Item# VRX-1012[/TD]
[TD="align: right"]$34.99 USD[/TD]
[TD="align: right"]1[/TD]
[TD="align: right"]$34.99 USD[/TD]

[TD="align: left"][/TD]
[TD="align: right"]$0.69 USD[/TD]
[TD="align: right"]1[/TD]
[TD="align: right"]$0.69 USD[/TD]


Subtotal

[TD="align: right"]

[/TD]








Hope to be flying FPV soon!
 
Last edited:

RoyBro

Senior Member
Mentor
#2
Cool. All you need now is a cheap dvr, and you can share your experience. What are you going to use for a monitor?
 

Craftydan

Hostage Taker of Quads
Moderator
Mentor
#6
Make airspace people! Andre's no longer watching his plane!

Congrats Dude! Wondered where you'd wandered off to -- working harder to pay the FPV bill apparently ;)

Looking forward to the footage/stories!
 

colorex

Rotor Riot!
Mentor
#9
Looks like an awesome deal! May need to get into it after all! Man I wish I had the dough right now...
Not the lowest price - but I decided to order from a US supplier in order to get the service and testing that you don't get from chinese vendors. I highly recommend SierraRC.com - excellent service, and IBCrazy himself recommended it to me.

And I get your feeling on "wish I had the dough", I've felt like that for a year and a half! :D

Thanks!
 

RoyBro

Senior Member
Mentor
#16
Someone once said. "It's good to be the King." I think it was Mel Brooks.

I know it must be true, because he says it every time I watch that movie.


 

colorex

Rotor Riot!
Mentor
#17
I'm looking around for a suitable case for the FPV gear. I'm open to suggestions. I don't like the tripod groundstations because I don't have a car and need to be able to get around in a bus with my gear.
 

colorex

Rotor Riot!
Mentor
#20
Looks cool, being able to store the transmitter in it too. My quad won't fit in one though, fixed arms. I have to look around town to see what I find. I'm kind of doubting an aluminum box because of the RF reflectiveness.

Will look into it.