• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

First Build - Q450

#1

Q450 - 450mm Frame
KK2 V1.5 - Flight Controller
ESC - Turnigy Plush 30a
Motor - NTM Prop Drive Series 28-26A 1200kv / 250w (Too small for the props, needs 750-900kv motor...)
Battery - Turnigy nano-tech 3300mah 3S 25~50C Lipo Pack

Using a CD container to cover the delicate board mounted on the top of the frame.
Using oversized three blade heavy Master Airscrew propellers because you can't break them, however they heat the poor motors up pretty good. I'm a new pilot, taking a hard spill or two isn't uncommon for me.

Comments/Feedback/Kudos welcome =)
 
Last edited: