Hey guys, I thought I'd share my first time soldering motor and battery connectors... So you can have a laugh
Not my first solder job, but never before used connectors.
First with the 3.5 bullets, The two first tries I got solder on the outside of the connector so it would not have fit into the case... Third try went better.
Then with the XT-60. First try - FAIL:
Second try, better:
No, I don't have heatshrink, so I'll cover the bare joints with hotglue or silicon...
I'll do it better next time
Not my first solder job, but never before used connectors.
First with the 3.5 bullets, The two first tries I got solder on the outside of the connector so it would not have fit into the case... Third try went better.
Then with the XT-60. First try - FAIL:
Second try, better:
No, I don't have heatshrink, so I'll cover the bare joints with hotglue or silicon...
I'll do it better next time