Flight Fest 2027 Design Build Challenge - At Sea In the Air

FoamyDM

Building Fool-Flying Noob
Moderator
Flight Fest 2027 Design Build Challenge - At Sea In the Air

After years of seeing some interesting under/oversea planes, I want to know if we could design enough DTFB based ideas with designs to have a whole Undersea themed fly-in then or course - combat! Join me in designing and building an aquatic themed Flying things to put in the air and combat at FF2027

Some inspirations:
a9870233-30-2.jpg
a50554cb439715b2e685adad82f5acef.jpg

airjelly.jpg
a-close-up-of-a-turtle-s-head-and-neck-photo.jpg
maxresdefault.jpg

OIP.WKZ00TTHdNx74BVNP3LnLwHaEA
pd19-05_small.png
Flyingfish_howcurious_o.jpg


Summary:

Participants will design and build an electric motor driven, radio-controlled mostly Foamboard aquatic-themed Aircraft, demonstrate that it is capable of controlled flight, and release the plans freely to the community. At the end of the design portion of the competition, a panel selected from the Flite Test forums will score the entries and select winners from the completed and flight-proven models posted on the forums.

Objective:
  • Celebrate the venerable community creativity by designing fish or aquatic themed planes - Fish, sharks, squid, manta ray jelly fish, dolphin, whale, flying Sail boats, Battleships, Submarines, etc.
  • Foster interest in building foam board model aircraft from community plans
  • Promote designing and building as one of the aspects of the FT community
  • Compete in flying events where any level of experience can be a winner
  • Engage in some friendly forum banter :)

OFFICIAL RULES:
Make a Build log that contains the following: (100 pts)
  • Entry (10pts)
    • Plane name and Pic of the goal (5 pts)
    • statement of why you chose it (5 pts)
  • History of the selection (15 pts)
    • Historic facts or it's lore in the alternate setting. Or create one, if little is known (5pts)
    • Stats (for the inspiration) (5 pts)
      Explain how you plan to make your subject fly (5 pts)
  • Build log - (25 pts)
    • Design steps and obstacles & how you overcame them (10 pts)
      • [Basic (2), Helpful (4), Well detailed in the right places (7), Article ready (10)]
    • Details of unique build techniques (5 pts)
    • Summarized updates in 1 post (5 pts)
    • RC stats (5pts)
  • Maiden Video/pic (10 pts)
  • Free Plans link (10 pts)
  • Decoration (15pts)
  • Take-away - Feedback and advice to future builders. How was it to build. how was it to fly. (7 pts)
    • [Stop - things that shouldn't be repeated
    • Start - things that should be done next time.
    • Continue - thing to remain the same. that went well.]
Bonus points:
+15 point if finished before January 31, 2027 (before Build-ruary 2027)​
+10 Upload your plans as a Flite Test resource​
+5 for an EZ pack version (STEM tent ready build)​

Deadline:
End of March 31st, 2027 (Midnight)

How to Enter - in the User Generated Challenges add a thread titled - FF'27 - At-Sea-in-the-Air Design Build Challenge: [craft name] by [entrant], afterward reply to this thread with a link to the build-log, so I can link it into the entrant list. Last get designing and have FUN!

Limitations:
Gassers are a no.
Your Imagination. 3D printed parts are encouraged. if it is all 3d printed, please make it your design. dressed Quadcopters are encouraged - they should be "dressed' (like the Minecraft creeper quad, et. al.). Maybe a flying airfoil or RC Kite could work?!

Winner will earn
  • Full-sized plan print. (pdf provided by winner)
  • Bragging rights
  • A Challenge Trophy.
-FoamyDM

P.S. - Sharknado or school of flying fish anyone? :D
 
Last edited:

LitterBug

Insanely Addicted Techno Geek Legendary Member
Moderator
Hmmmm......
1000012318.jpg


Maybe I can make this SUP fly if it falls off my co-workers rack...
 

telnar1236

Master member
I might enter - my first successful flying things were kites shaped like ships built with printer paper and coffee stirs. Might need to revisit one of those. And it would be fun to have the opportunity to work with stick and tissue type construction again. I've been moving house for the past month, though, so I have a bit of a backlog of projects.
 

telnar1236

Master member
My thinking for an entry - sort of a steampunk flying pirate ship - not sure if I'll actually build it, or for that matter if it would fly if I did. On paper it should, although not well.
1794016925205.png

Idea is to have a 3 channel design powered by two 5" props. It would use tissue wrapping a 3D printed structure so it should be very light and fly quite slow.
1794017180343.png

Wingspan would be 1200 mm, so it's a fairly big design. It would also be quite time consuming to design and build, so I'm not 100% sure if I want to tackle it with all the other projects I have ongoing.
1794017325294.png

The jib might need to go away since it's adding a fair bit of vertical area ahead of the CG, but hopefully the driver sail and rudder will be enough to counter it.
1794017491368.png

I'd also add a bunch of decoration to the hull if I build it to make it look more ship-like.
1794017553293.png