Flite Test Design Engagement Challenge

Ok so who’s all gonna be part of the challenge, head count!


  • Total voters
    42

bwarz

Master member
anyone else take notes on the design while your working things out 😆
15988547128335817151603271759443.jpg
15988547324678012962046075320944.jpg
15988547500934033639237673346266.jpg
 

bwarz

Master member
7x5 prop 2208 1350kV 3S. pulling just over 10A at 116W. With an estimated AUW of just over 400g I think I'll be ok? I could go to an 8" prop if necessary... All wired and programmed. It was actually a nice day today but the family had a busy day (and I didn't get it done until half an hour ago...) hopefully the wind will die down in the next few days and I can see how it goes! Just need to finish the hatch and canopy
 

FlyingWithRyan

Elite member
7x5 prop 2208 1350kV 3S. pulling just over 10A at 116W. With an estimated AUW of just over 400g I think I'll be ok? I could go to an 8" prop if necessary... All wired and programmed. It was actually a nice day today but the family had a busy day (and I didn't get it done until half an hour ago...) hopefully the wind will die down in the next few days and I can see how it goes! Just need to finish the hatch and canopy
Im a overpower and ask questions later type of guy but to each their own. I think thatll be a very scale flying power pack.
 

bwarz

Master member
I kinda was afraid that I wouldn't have enough oomph but after the power meter... it's not going to be nuts, but I think it'll be ok for me;):rolleyes: