I sell under jerrytbirdsc on the rcgroups.com forum. Here is a link to my ad
I am selling a Flitetest Batbone frame Tricopter. It has a RCExplorer tilt mechanism and Turnigy metal gear servo with maybe three flights on it. For legs I am using a 400 class helicopter landing skids. Motors are about 25 inches apart so I guess it's 600mm class. Motors and ESCs have a few flights on them as they came from a previous build. Motors are smooth running.
Build list:
Turnigy D2830/11 1000KV motors with RCTimer prop adapters and Nylon lock nuts.
Slow Fly 9 x 4.5 Props
Hobbyking F30A ESCs with Simon K
Turnigy TGY-211DMH Coreless w/ Heat Sink 16g servo
KK 2.1 Flight Controller board with kk2.1++ all in one R4 firmware
Custom wire harness with XT60 power connector and two JST connectors for battery voltage monitoring or FPV.
For an additional $10, I will include the Turnigy receiver so it could be BNF if you already have a Turnigy 9X/Flysky transmitter.
Will only accept Paypal payment and ship to it's verified US address.
I am selling a Flitetest Batbone frame Tricopter. It has a RCExplorer tilt mechanism and Turnigy metal gear servo with maybe three flights on it. For legs I am using a 400 class helicopter landing skids. Motors are about 25 inches apart so I guess it's 600mm class. Motors and ESCs have a few flights on them as they came from a previous build. Motors are smooth running.
Build list:
Turnigy D2830/11 1000KV motors with RCTimer prop adapters and Nylon lock nuts.
Slow Fly 9 x 4.5 Props
Hobbyking F30A ESCs with Simon K
Turnigy TGY-211DMH Coreless w/ Heat Sink 16g servo
KK 2.1 Flight Controller board with kk2.1++ all in one R4 firmware
Custom wire harness with XT60 power connector and two JST connectors for battery voltage monitoring or FPV.
For an additional $10, I will include the Turnigy receiver so it could be BNF if you already have a Turnigy 9X/Flysky transmitter.
Will only accept Paypal payment and ship to it's verified US address.
