• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

FliteTest in Phoenix RC (Model Index)

FL_Engineer

Well-known member
Has anyone made the edge 540 for phoenix? I'm looking to try some 3d on that before I try it on my newly built edge.
Although there are a bunch of models available on rcgroups.com, I'd be interested in any additional models as well (I don't believe the Edge is available). I'm also looking for the baby blender and previously mentioned P40. Can't get realflight to recognize my controller and I'm too cheap to by the interlink controller so Phoenix scratches the itch.
 
Oops - my bad - I've been neglecting building new FT Phoenix models for no good reason.
Have the Edge 540, Baby Blender and P-40 in the queue and will try to get to them sooner rather than later.

With respect to the Edge 540, you might try the existing Extreme Flight Edge 540 at the following link.
Just scale it to the size and weight of the FliteTest version and give it a go.
https://www.rcgroups.com/forums/showpost.php?p=32721973&postcount=104

And for the P-40, here's one you can try while you wait for slow Rick to catch up.
https://www.rcgroups.com/forums/showpost.php?p=35855823&postcount=634

I'm really liking the looks of the Baby Blender, so it will pop out first.

Cheers, rick
 
Last edited:

FL_Engineer

Well-known member
Oops - my bad - I've been neglecting building new FT Phoenix models for no good reason.
Have the Edge 540, Baby Blender and P-40 in the queue and will try to get to them sooner rather than later.

With respect to the Edge 540, you might try the existing Extreme Flight Edge 540 at the following link.
Just scale it to the size and weight of the FliteTest version and give it a go.
https://www.rcgroups.com/forums/showpost.php?p=32721973&postcount=104

And for the P-40, here's one you can try while you wait for slow Rick to catch up.
https://www.rcgroups.com/forums/showpost.php?p=35855823&postcount=634

I'm really liking the looks of the Baby Blender, so it will pop out first.

Cheers, rick
I've been flying your P-40 and it's quite good. I do find the FT models more my speed though. Thanks for doing the Timber X, I've gotten tons of flight time without the danger of trashing my model 🛩️💥
 
I've been flying your P-40 and it's quite good. I do find the FT models more my speed though. Thanks for doing the Timber X, I've gotten tons of flight time without the danger of trashing my model 🛩️💥
You're most welcome - I fly the Phoenix versions of my planes when I can't get out or the WX is bad. Cheers, rick
 

FL_Engineer

Well-known member
Flew the Baby blender last night and it has an awesome roll rate. I did notice there seems to be a rendering issue with the bottom of the fuse (its transparent in flight) but doesn't impact flight characteristics.
 
Flew the Baby blender last night and it has an awesome roll rate. I did notice there seems to be a rendering issue with the bottom of the fuse (its transparent in flight) but doesn't impact flight characteristics.
Not a rendering issue, as I didn't add a bottom to the fuselage as didn't think the Baby Blender had one.
I may have overlooked it, but I didn't see a fuselage bottom in either the plans or the build video.
But let me know if it should have one and I'll add it.

Cheers, rick
 

mrjdstewart

Well-known member
so who is going to build the new STEM EZ-pack planes? would love to be able to have kids on sim before first flight.

huge thanks to anyone who can. (y)

me :cool:
 
Do you mean the Alpha, Bravo and Charlie, or something different?

Update - I see the thread now. Will build Phoenix models when plans are available.
Please let me know if you see plans, as I don't follow FT forums too well.

Thanks, Rick
 
I have downloaded the Phoenix Sim and the updates to Ver6.....for my Win 10 computer.............I thought I had it made with my SPECKTRUM DX5e transmitter and SPMWS2000 dongle.......wrong.......It seems I must have the USB plug in order to use the Sim. I searched Amazon and other places but can't seem to locate one sold in the USA. Has anyone found one??
 
I have downloaded the Phoenix Sim and the updates to Ver6.....for my Win 10 computer.............I thought I had it made with my SPECKTRUM DX5e transmitter and SPMWS2000 dongle.......wrong.......It seems I must have the USB plug in order to use the Sim. I searched Amazon and other places but can't seem to locate one sold in the USA. Has anyone found one??
Check some of the RCG Simulator threads here.

And you might want to roll back to Phoenix v5.5.l as it's more stable.

And a question for you - what model are you holding in your avatar picture? Looks interesting. Cheers, rick
 
Check some of the RCG Simulator threads here.

And you might want to roll back to Phoenix v5.5.l as it's more stable.

And a question for you - what model are you holding in your avatar picture? Looks interesting. Cheers, rick
Thanks Rick. I will check out the info.

The model is the original prototype Leisure Electronics Cabin Playboy built by my dear friend Dale Black. I flew the model in the Electric Class in SAM events for almost 7 years. It was unbeatable.