cedershack
New member
I am having some issues with getting my Tx inputs to be viewable in CleanFlight. I have followed a lot of tutorials with no success.
Here are my steps:
1. updated all firmware
2. changed to ppm in cleanflight and Tx/Rx
3. used the Tx inputs and with no avail
The Tx and Rx are bound, I have power to the Flight Controller, everything else looks good. If anyone has any suggestions or ideas to help me out I greatly appreciate it. If anyone has time to do a live walkthrough (skype or google hangouts, phone) that would be great too.
Thank you!
Here are my steps:
1. updated all firmware
2. changed to ppm in cleanflight and Tx/Rx
3. used the Tx inputs and with no avail
The Tx and Rx are bound, I have power to the Flight Controller, everything else looks good. If anyone has any suggestions or ideas to help me out I greatly appreciate it. If anyone has time to do a live walkthrough (skype or google hangouts, phone) that would be great too.
Thank you!
