Radiooutofcontrol
New member
Hi! New to fixed wing RC this season. All going well and enjoying the FT stuff.
Quick question - my dollar store board built FT bushwacker got a little rain on it while in my car during a downpour with the windows slightly open. I thought all was good but found my control surfaces are now warped. Ailerons and elevator suffered. I know these foam board planes are relatively disposable, but Only have 1 flight on it and not ready to start rebuilding it just yet.
Any suggestions on ways to correct this? Or other experience with storing and protecting these board board planes?
Thanks!
Quick question - my dollar store board built FT bushwacker got a little rain on it while in my car during a downpour with the windows slightly open. I thought all was good but found my control surfaces are now warped. Ailerons and elevator suffered. I know these foam board planes are relatively disposable, but Only have 1 flight on it and not ready to start rebuilding it just yet.
Any suggestions on ways to correct this? Or other experience with storing and protecting these board board planes?
Thanks!