Houndpup Rc
Legendary member
Yeah you are probably gong to beat me...Unless I get a bigger motor...
FOAM BOARD HJK SPEEDWING DISCUSSION
- Thread starter Zoom Master
- Start date
Houndpup Rc
Legendary member
But I think I will be able to hit 200mph on my current setup!
Zoom Master
Elite member
Maybe @Mr Man will beat u......or maybe not after all I am using a 4000W motor on mine...
Zoom Master
Elite member
Well lets see !
Houndpup Rc
Legendary member
It takes a LOT of skill......
Zoom Master
Elite member
A lot of skill to pilot......or to build ?
Zoom Master
Elite member
The MEGA motor I was gonna use is not very powerful only about 400W which is basically nothing compared to 4500W
Houndpup Rc
Legendary member
Both but mainly pilot.
Houndpup Rc
Legendary member
4500w is INSANE! My current motor is 1500w on 6s and that is almost scary powerful!!!! It can kill you if you do something wrong. Caution: Never put the prop on until you have everything programed and built...basically not until you are ready to fly at the field!
Zoom Master
Elite member
Ok 👍
Zoom Master
Elite member
Ok so put ur fingers near the prop and put on ur massive prop on the motor before everything is ready !!
Houndpup Rc
Legendary member
NO! 🤣 🤣 🤣 Make sure to plug it into the wrong channel too! JK🤣🤣🤣
Zoom Master
Elite member
Will do 🙏
Houndpup Rc
Legendary member
Just to make sure I am kidding!
Zoom Master
Elite member
Yeah I know 😂
Mr Man
Mr SPEED!
I put a 3500w motor in my Funjet…..
Zoom Master
Elite member
`Those are rookie numbers compared to by 4500W
Zoom Master
Elite member
4500W at 12s and paired with a 200 amp esc !
Mr Man
Mr SPEED!
200a esc, 6s. 7x9-7x15 prop….. And skill.
Mr Man
Mr SPEED!
Rookie?….. I doubt that. 😂
Similar threads
