Foamboard Focke Wulf 190

[Niez13]

I've always loved Focke Wulf so I thought I'd make it. I tried changing a few things from when I designed my P-47. This plane has a bigger hatch and new swappable power pack thats in the FT Corsair. I have yet to fly it, but I am worried its going to be too tail heavy. I even stuck 6 Duracell batteries in the nose and it still doesn't seem right. It has a 47 inch wingspan. I still need to perfect the plans but they are almost complete and should be done soon.

 

[Jaxx]

Wow, this looks incredible!

 

[Michael9865]

Amazing. Looks fantastic.

 

[Grifflyer]

Great work!!

 

[Crazy Goats]

That's awesome! The FW190 is one of my favorite planes ever. Eagerly awaiting plans.

 

[Niez13]

That's awesome! The FW190 is one of my favorite planes ever. Eagerly awaiting plans.

They will be out soon its just tough explaining how to build it because of new techniques and styles of building.

 

[degriz]

Looks great! another future build

 

[mayan]

WOW man that's really an amazing build!

 

[bpw823]

That is insanely clean! I'll be building one for sure if you release plans!

 

[Niez13]

Here is some flight video of the Focke Wulf 190. It flew amazing but I have to do some tweaking before I release the plans like dialing up the roll rate because it was a little slow. Besides that it is an amazing flying aircraft. When I'm done with the plans, if you're up for building a scale flying and scale looking plane it is perfect for you.

 

[Michael9865]

Looks amazing in the air. What was causing the yaw waggles?

 

[Niez13]

Looks amazing in the air. What was causing the yaw waggles?

It was just the wind because the rudder wasn't touchy.

 

[FoamyDM]

Great Job. - looks like the master craft series level construction, very exciting!

*Watched* and looking forward to plans so I can build this to accompany the Corsair build.

 

[Strider38]

Wow looks amazing. Master series for sure. Got a soft spot for warbirds. Be great if you can also do the spitfire

 

[Niez13]

Wow looks amazing. Master series for sure. Got a soft spot for warbirds. Be great if you can also do the spitfire

Thanks! Look in the future for a Spitfire

 

[Kyle124rombo]

Niez13, of love to get a hold of some prerelease beta plans if you wouldn't mind, I've built 2 master series corsair and had one going close to 60. I need a new build and after the master series came out, I don't have much time to build so when I do I want to make it count! Your planes are beautiful, and I'm past most of the flite test builds, and not quite ready for nerdnics 120mph planes. Although the 800'll spitfire is on the to do list

 

[Niez13]

Niez13, of love to get a hold of some prerelease beta plans if you wouldn't mind, I've built 2 master series corsair and had one going close to 60. I need a new build and after the master series came out, I don't have much time to build so when I do I want to make it count! Your planes are beautiful, and I'm past most of the flite test builds, and not quite ready for nerdnics 120mph planes. Although the 800'll spitfire is on the to do list

These are the plans so far. I installed the servos right behind the cockpit piece on the box for formers inside the formed pieces. I have been flying the Focke Wulf for a while now and from experience I would recommend making some cooling for the ESC. I am going to try putting a knack-a duct on the formed piece(B). I am just using the new flitetest swappable power pack in the corsair. The CG is about 2 inches from the leading edge. The build should be pretty simple but if you have any questions let me know and I'll try to answer them as soon as possible. I do have to dial up the ailerons because it has a little bit of a slow roll rate but I like it because it flies scale. I might sure if you like flying scale or flying fun so I thought I'd let you know in advance.

 

[Kyle124rombo]

You are the man, I am going to start this weekend. Hopefully fly next weekend. This is going to be a fast one I think. Is it Friday yet?!

 

[jack954]

Your designs look really good. Built the FW-190 and was going to maiden it on Sunday, but my elevator linkage was not working correctly so decided not to risk it. Hopefully this weekend. Excited for the p-47!

 

[Niez13]

Your designs look really good. Built the FW-190 and was going to maiden it on Sunday, but my elevator linkage was not working correctly so decided not to risk it. Hopefully this weekend. Excited for the p-47!
View attachment 133316 View attachment 133315

That turned out awesome! I hope the maiden goes well for you and do you need to know where the CG should be? I'm not sure if I have it on the plans.