This Forum has had me VERY excited to get into and build one of these Gremlins.
The Thursday before two weekends ago it came in however, I was finishing prep and cleanup on a DND event for that weekend, and most of this week involved late family and friend nights. so Last night was my first real night to build.
During the week I had printed LB's gremlin frame. and had one night to work on the getting the ESC connected and the power lead attached. Last night I almost finished it up. I love how it's come together so far. The AIO make some of this much easier than the RoboCAT build
I need your help.
After I calibrated the ESCs, I spooled up the motors to find the low throttle point, I found the front right motor (motor 2), wouldn't spool at all, then I saw one of the leads had not been soldered. I soldered and double checked the others on that arm, I thought they looked good. When they spooled up, that motor was twitchy.
So I read that as a short circuit. Is that Correct?
Any advice on this? Should I remove and re-solder that whole arm assemblage? (would that help?)
The Thursday before two weekends ago it came in however, I was finishing prep and cleanup on a DND event for that weekend, and most of this week involved late family and friend nights. so Last night was my first real night to build.
During the week I had printed LB's gremlin frame. and had one night to work on the getting the ESC connected and the power lead attached. Last night I almost finished it up. I love how it's come together so far. The AIO make some of this much easier than the RoboCAT build
I need your help.
After I calibrated the ESCs, I spooled up the motors to find the low throttle point, I found the front right motor (motor 2), wouldn't spool at all, then I saw one of the leads had not been soldered. I soldered and double checked the others on that arm, I thought they looked good. When they spooled up, that motor was twitchy.
So I read that as a short circuit. Is that Correct?
Any advice on this? Should I remove and re-solder that whole arm assemblage? (would that help?)