JamesonOKC
Member
I am working on setting up FPV for my Durafly Tundra. I will link below the transmitter and receiver I am using. I am using a mobius as the camera and I can get the signal to come through but as soon as I move more than 1-2 feet away from the transmitter the video goes to static. Has anyone ever ran into this problem? Thanks!
I have tried on 25mw 200mw and 600mw and all different frequencies with no luck.
I have also used the standard antenna that came with the TX and RX and a set or circularized polar antenna with the same results
I also disconnected the audio wire from the TX and my range is a little longer but still less than 10ft.
I changed my mobius to output in PAL instead of NTSC and I got much better range for a few minutes now it is back to garbage.
https://www.amazon.com/gp/product/B07DC5MNTF/?tag=lstir-20
https://www.amazon.com/gp/product/B06XJLQL3N/?tag=lstir-20
I have tried on 25mw 200mw and 600mw and all different frequencies with no luck.
I have also used the standard antenna that came with the TX and RX and a set or circularized polar antenna with the same results
I also disconnected the audio wire from the TX and my range is a little longer but still less than 10ft.
I changed my mobius to output in PAL instead of NTSC and I got much better range for a few minutes now it is back to garbage.
https://www.amazon.com/gp/product/B07DC5MNTF/?tag=lstir-20
https://www.amazon.com/gp/product/B06XJLQL3N/?tag=lstir-20
Last edited: