fred0000
Senior Member
as some of you may have noticed in my heli photo thread I mentioned I had another build lined up, I recieved a kit from my girlfriend for christmas and wanted to document the build, I will take pictures as I remember and post up my progress.
specs for this build are as follows
(this kit was shown as a copter-x kit in the ad when I bought it but that is not the kit I recieved, however this kit is still very nice, i'm not a fan of the shade of blue on the anodizing, but its not bad)
-eBay carbon fiber/aluminum heli kit
-HXT900 cyclic servo's
-Corona DS-919MG tail servo
-HK401B gyro
-towerpro 40a ESC
-Mystery D2632-3500kv motor
-Turnigy 20c 2200mah 3s lipo
-Turnigy 9x RX/TX
i'll try to cover as much as I can, anything you want a specific picture on, or want me to elaborate more on feel free to ask and i'll do my best to help.
specs for this build are as follows
(this kit was shown as a copter-x kit in the ad when I bought it but that is not the kit I recieved, however this kit is still very nice, i'm not a fan of the shade of blue on the anodizing, but its not bad)
-eBay carbon fiber/aluminum heli kit
-HXT900 cyclic servo's
-Corona DS-919MG tail servo
-HK401B gyro
-towerpro 40a ESC
-Mystery D2632-3500kv motor
-Turnigy 20c 2200mah 3s lipo
-Turnigy 9x RX/TX
i'll try to cover as much as I can, anything you want a specific picture on, or want me to elaborate more on feel free to ask and i'll do my best to help.