Ok, so its not a plane, or anything that flies, and not entirely built from scratch. However, I did build it, and wasnt really sure where to post this at, as I didnt see a section that seemed appropriate other than this one, kind of appropriate?
My take on a hand held 2 axis gimbal, re-using a previously broken Tarot T2D Gimbal I had lying around.
Part of the gimbal I did have to make myself, it was the one pin that lets the camera tilt up and down. I couldn't find replacement pins/ motor shafts for it online, so i made one from a 3mm Philips screwdriver shaft out of an Ace hardware screwdriver kit. Oh, and I made the rest of the gimbal, minus the tarot parts, from other things i purchased at autozone.
Here is a link https://www.youtube.com/watch?v=it7rIJfTpKk of my end result.
My take on a hand held 2 axis gimbal, re-using a previously broken Tarot T2D Gimbal I had lying around.
Part of the gimbal I did have to make myself, it was the one pin that lets the camera tilt up and down. I couldn't find replacement pins/ motor shafts for it online, so i made one from a 3mm Philips screwdriver shaft out of an Ace hardware screwdriver kit. Oh, and I made the rest of the gimbal, minus the tarot parts, from other things i purchased at autozone.
Here is a link https://www.youtube.com/watch?v=it7rIJfTpKk of my end result.
Last edited:
