sammi_boii66
Junior Member
so iv'e connected the d4r-ii to the naze using the provided (black and green) cable. VBat and telemetry are enabled on my naze. I have got the Osdoge board stacked on top of the naze so i cant connect my battery directly to the VBat connector on the naze but i have got it connected to the VBat connector on the Osdoge. for some reason im not recieving voltage info on my taranis. i have it set to display cell and cells values on the telemetry screens. In the telemetry menu on the taranis under the user data section i have the voltage source to A1.
Followed youtube tutorials on how to set up telemetry and it still wont work.
someone help!
Followed youtube tutorials on how to set up telemetry and it still wont work.
someone help!
