FT 3D & Mini Cuda Wannabee

Keno

Well-known member
FT 3D awaiting better weather for maiden. This was a sweet build very well designed. Really like the symmetrical wing construction method. Plus Josh did a great presentation for its construction. Thanks.
 

Attachments

  • ft3d pix.jpg
    ft3d pix.jpg
    762.6 KB · Views: 0

d8veh

Elite member
Mine was built beautifully too, and it flew beautifully for about 10 seconds until it was out of range at 50 meters because I left my transmitter in range test mode! Luckily, it's not too badly damaged.
 

Keno

Well-known member
Mini 'Cuda Wannabee
DTFB Design: Jason Potosky (jpot1)
This one is a winner flies great. Love building it and flying, have to build another, best friend now owns this one. As you can see it needed some active body trim but in the end all went well. Happy flying and thanks for this one Jason.
 

Attachments

  • wantabe Cuda 1.jpg
    wantabe Cuda 1.jpg
    329.2 KB · Views: 0
  • wantabe Cuda.jpg
    wantabe Cuda.jpg
    2.5 MB · Views: 0
Last edited: