cjspecial
Member
I designed and have been tested this for almost a year, made improvement and now feel it's ready for the Flite Test community to enjoy. I used 0.25" diameter magnets but 6mm may work. Magnets are held in with CA and some kicker. The fuselage is available as a one piece or two piece for those with smaller printers and is held in with hot glue. The nose has a pocket for adding nose weight if needed. Mine needed it from lack of an fpv camera, so I used buck shot and hot glue. Here is the link to the files. https://www.thingiverse.com/thing:3034586
Happy Building and flying!
Chris J
Happy Building and flying!
Chris J