Fixes to TILED plans
Hi folks, this is my first time posting here, though I've been following Flite Test for a while on YouTube. I've been wanting to scratchbuild one of the many awesome designs for a while and finally settled on the Bloody Wonder. I have a few Don's Wicked 3000kv motors looking for homes, so I'm hoping to build a real screamer
I printed out the TILED plans and was assembling them last night when I ran into a couple issues. Specifically, the last 10 or so pages were pretty much missing the top trim lines. Also, the width of the trim lines (8" x 10") seemed to shrink a bit on these last 10 or so pages, though I believe this was due to my printer. Additionally, the first page indicated "page 1 of 30" but there only 18 pages. And lastly, page 9 was out of order and fell just before page 18. So this morning I made the following corrections which will hopefully yield a better printout:
• Shifted clipping mask up slightly on the last 10 or so pages, so the top trim lines are now visible.
• Corrected page 1 to read "page 1 of 18".
• Moved page 9 into the correct position.
• Resized the pages to 8.5" x 11" <--- This should hopefully prevent any anomalies when allowing the printer to print at 100% and automatically center the original reduced page size (at least on my printer).
If anybody is interested, you can download the plans from my Google Drive here:
https://drive.google.com/folderview?id=0BwzoG_wJavTCQjJ4d2NnYUVxWWs&usp=sharing
I can't wait to get this sucker built and tearing up the skies, it looks like such a blast to fly!