I just finished my commuter and maidened it today! I rigged up a hat cam so if the video turns out, I’ll be posting it. I was worried about not having enough power on 2s since I was flying pretty heavy with 9 grams servos and a 1500 mah 2s BUT I ended up cruising at only 1/3 throttle! It was great. I am using an 1808 v-spec motor (hobbyking) and a 9/5 prop I trimmed to like 5-6 inches. It’s a fun plane! To the removable wing part now... I made a tape hinge in the back with the back windshield, and then added bbq skewers for the rubber bands. This allows easier access to electronics and a top-mounting battery so I can fit my oversized 1500 mah 2s batteries😂. I also added two guides to my wing so I got the same line up every time. What a fun plane!