Beetlebeetle
Member
Thought you'd like to see the landing gear I made for my Explorer. It's difficult to launch it when it is very heavy with 2 batteries, camera etc. I also made a set for my Racer. I bought a metre of aluminium stock from the hardware store ($4) and bent it to shape then used some screws to attach the two bottom braces. I cut a slot into the foam for the cross-bar, added a lot of hot glue to the slot then 2 beads to where the braces would lay then pressed the whole thing into the foam. It is very strong and light!
I just need to add a tail-wheel.
I just need to add a tail-wheel.