Ft Gremlin OSD

[RHengelsberg]

I have an ft gremlin with an f3 femto flight controller. In Betaflight it allows me to enable and configure an OSD. Would it be possible to set up an osd properly. If it is possible where would I attach the camera and vtx leads on the flight controller?

 

[ElectriSean]

The Femto FC doesn't include an OSD chip or circuitry unfortunately.

 

[RHengelsberg]

Ok, thank you for the clarification.

 

[PsyBorg]

I ditched those crappy aio cameras for a runcam microswift v2 and an eachine atx03 vtx.

No more video issues AND I get voltage, flight time, and pilot name in the camera osd. It also makes a HUGE difference being able to set the camera up for fpv not static indoor settings every camera made is defaulted to.

 

[ElectriSean]

I ditched those crappy aio cameras for a runcam microswift v2 and an eachine atx03 vtx.

No more video issues AND I get voltage, flight time, and pilot name in the camera osd. It also makes a HUGE difference being able to set the camera up for fpv not static indoor settings every camera made is defaulted to.

I run the exact same setup on my 2" Eclair, it's fantastic - especially compared to the AIO setup I started with.